|
You'll probably see more XD9000i winches on trail rigs than any other
winch. No load line speed of 38-feet per minute and three-stage
planetary gearing are just a few reasons why. It's also a terrific fit
in a hidden mounting system.
XD9000i SPECS/PART NUMBERS:
Part Numbers: PN 27550 (12V DC)
Rated line pull: 9000 lbs. (4080 kgs.) single-line
Motor: 12V 4.6 hp, Series Wound, 24V 2.5 hp, Series
Wound
Remote Control: Remote switch, 12' (3.7m) lead
Geartrain: 3-Stage Planetary
Gear ratio: 156:1
Lubrication: Aeroshell #17
Clutch (freespooling): Sliding Ring Gear
Brake: Automatic Direct Drive Cone
Drum diameter/Length: 2.5"/9.0" (6.4cm/23cm)
Weight: 85 lbs. (38.5 kgs.)
Wire rope: 125', 5/16" diameter (38m, 8mm diameter)
Replacement wire rope: PN 25987
Fairlead: Roller
Recommended Battery: 650 CCA minimum for winching
Battery leads: 2 gauge, 72" (1.83m)
Finish: Argent Powder Coat Nuts/bolts PN 39625
CE winches: CE products are designed to meet European
Standards. CE winches include CE labels, Manuals, Power Interrupt Kit,
Safety Hook and Thimble.
12V DC PERFORMANCE SPECS:
Line Pull
Lbs.(Kgs.)
0
2000(910)
4000(1810)
6000(2720)
8000(3630)
9000(4080)
|
Line Speed
Ft./min.(M/min.)
38(11.6)
14.4(4.39)
11(3.35)
8.67(2.64)
6.88(2.10)
6.38(1.94)
|
Motor
Current
70 amps
180 amps
255 amps
330 amps
415 amps
460 amps
|
Pull by layer:
layer/Lbs(Kgs.)
1/9000(4082)
2/8190(3715)
3/7500(3402)
4/7010(3180)
5/6570(2980)
|
Above performance specs are based on first layer of drum
Winch Dimensions: 21.8" L. x 6.3" D. x 9.94" H.
(553mm L. x 160mm D. x 252mm H.)
Mounting Bolt Pattern: 10.0" x 4.5" (254mm x
114.3mm)
|
